本公司是意大利玛泰滑片式空气压缩机办事处
起源
在1919年，第一次世界大战结束后，数以万计的意大利人开始重建他们的生活。与此同时，Enes Mattei—一名年轻的工程部队军官，必须做出抉择：是在工程部队接受一份稳定的工作，还是尝试追求他的个人梦想。虽然意识到可利用的财政资源有限，年轻的MATTEI先生仍然凭借他从工程部队获得的宝贵经验，沿着期望已久的创业之路，开始了压缩空气领域的探索。而在那时，压缩机行业还没有得到充分发展。
在意大利市场的发展和成功
十五年前，玛泰空气压缩机成为了一个意大利市场上建设完备的实体。在1934年，公司制造出了第一台柴油驱动的可移动式空气压缩机。1938年，ENEA MATTEI先生在蒙扎收购了一家铸造厂。由于市场前景看好，他开始在MILAN的VIAFELIRE建造一家新的工厂。然而由于二战的爆发，生意被迫停顿。直到战后重建开始，公司才得以重新运作。从1946年到1952年间，MATTEI先生着力对公司进行扩张和革新。
从战后至今
1960年玛泰成为了一家股份公司，并在米兰附近的vimodrone开始兴建一个新厂。得力于公司的CEO CONTALDI先生的贡献，工厂在1966年正式投产。在1977年Ing.Enea Mattei Spa接管了Officine Meccaniche Ing.Contaldi,--发电机组行业的市场领军企业。4年后在贝加莫附近的zingonia成立了一个新的制造中心。从1985年至1988年，美国、英国和法国的分厂相继投产，德国分厂也于2000年落成。
今天，玛泰在意大利市场处于领导地位并开始了全球化运作。在全世界玛泰已有100个分支机构，50%的产品用于出口。公司的成就已经为质量管理体系全面认可。在1994年，公司通过ISO UNI EN 9001认证。
The origins
In 1919, when the First World War ended, thousands of Italians had to reorganise their lives from the beginning.
In the same period, Enea Mattei, a young officer in the Army Engineering Corps, had to decide whether to accept a secure job in the Engineering Corps or try to pursue his individual aspirations.
Though aware of the limited financial resources he had at his disposal, the young Mattei started off on the compressed air industry, following his marked disposition for entrepreneurship and exploiting the experience he had gained in the Engineering Corps.
Moreover, at those times, the compressed air industry had not developed yet.
Development and success in the Italian market
Fifteen years later, Mattei air compressors became a well-established reality in the Italian market and in 1934 the firm manufactured the first portable compressor with diesel engine.
In 1938 Mr Enea Mattei took over a cast iron foundry in Monza, and thanks to the good prospects in the market, he started building a new plant in Milan, in via Feltre.
Nevertheless, when the Second World War broke out, the business experienced a sudden rest. As reconstruction began, however, the activity started again and between 1946 and 1952 Mr Mattei committed himself to enlarge and renovate his company.
From the post war up to the present
In 1960 Mattei became a Joint Stock Company and a new plant in Vimodrone, near Milan, began to be built. The factory opened in 1966, also thanks to the contribution of Mr Contaldi, the CEO. In 1977 Ing. Enea Mattei Spa took over Officine Meccaniche Ing. Contaldi, a market leader in the generating sets industry. Four years later a new production centre in Zingonia, near Bergamo, was founded and between 1985 and 1988 exclusive distributors in USA, UK and France were opened. The German exclusive distributor was inaugurated in 2000.
Today Mattei holds a leading position in the Italian market and operates worldwide with 100 distributors and exports 50% of its production.
The company's success is also confirmed by the ISO UNI EN 9001 Quality Management System obtained in 1994.
|
回到页首
